diff --git a/drivers/clk/ti/Kconfig b/drivers/clk/ti/Kconfig
index be4f268..c430dd9 100644
--- a/drivers/clk/ti/Kconfig
+++ b/drivers/clk/ti/Kconfig
@@ -3,6 +3,13 @@
 # Copyright (C) 2020 Dario Binacchi <dariobin@libero.it>
 #
 
+config CLK_TI_AM3_DPLL
+	bool "TI AM33XX Digital Phase-Locked Loop (DPLL) clock drivers"
+	depends on CLK && OF_CONTROL
+	help
+	  This enables the DPLL clock drivers support on AM33XX SoCs. The DPLL
+	  provides all interface clocks and functional clocks to the processor.
+
 config CLK_TI_MUX
 	bool "TI mux clock driver"
 	depends on CLK && OF_CONTROL && CLK_CCF
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 5faf68d..9e14b83 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -3,4 +3,5 @@
 # Copyright (C) 2020 Dario Binacchi <dariobin@libero.it>
 #
 
+obj-$(CONFIG_CLK_TI_AM3_DPLL) += clk-am3-dpll.o clk-am3-dpll-x2.o
 obj-$(CONFIG_CLK_TI_MUX) += clk-mux.o
diff --git a/drivers/clk/ti/clk-am3-dpll-x2.c b/drivers/clk/ti/clk-am3-dpll-x2.c
new file mode 100644
index 0000000..3cf279d
--- /dev/null
+++ b/drivers/clk/ti/clk-am3-dpll-x2.c
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * TI DPLL x2 clock support
+ *
+ * Copyright (C) 2020 Dario Binacchi <dariobin@libero.it>
+ *
+ * Loosely based on Linux kernel drivers/clk/ti/dpll.c
+ */
+
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <linux/clk-provider.h>
+
+struct clk_ti_am3_dpll_x2_priv {
+	struct clk parent;
+};
+
+static ulong clk_ti_am3_dpll_x2_get_rate(struct clk *clk)
+{
+	struct clk_ti_am3_dpll_x2_priv *priv = dev_get_priv(clk->dev);
+	unsigned long rate;
+
+	rate = clk_get_rate(&priv->parent);
+	if (IS_ERR_VALUE(rate))
+		return rate;
+
+	rate *= 2;
+	dev_dbg(clk->dev, "rate=%ld\n", rate);
+	return rate;
+}
+
+const struct clk_ops clk_ti_am3_dpll_x2_ops = {
+	.get_rate = clk_ti_am3_dpll_x2_get_rate,
+};
+
+static int clk_ti_am3_dpll_x2_remove(struct udevice *dev)
+{
+	struct clk_ti_am3_dpll_x2_priv *priv = dev_get_priv(dev);
+	int err;
+
+	err = clk_release_all(&priv->parent, 1);
+	if (err) {
+		dev_err(dev, "failed to release parent clock\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int clk_ti_am3_dpll_x2_probe(struct udevice *dev)
+{
+	struct clk_ti_am3_dpll_x2_priv *priv = dev_get_priv(dev);
+	int err;
+
+	err = clk_get_by_index(dev, 0, &priv->parent);
+	if (err) {
+		dev_err(dev, "%s: failed to get parent clock\n", __func__);
+		return err;
+	}
+
+	return 0;
+}
+
+static const struct udevice_id clk_ti_am3_dpll_x2_of_match[] = {
+	{.compatible = "ti,am3-dpll-x2-clock"},
+	{}
+};
+
+U_BOOT_DRIVER(clk_ti_am3_dpll_x2) = {
+	.name = "ti_am3_dpll_x2_clock",
+	.id = UCLASS_CLK,
+	.of_match = clk_ti_am3_dpll_x2_of_match,
+	.probe = clk_ti_am3_dpll_x2_probe,
+	.remove = clk_ti_am3_dpll_x2_remove,
+	.priv_auto = sizeof(struct clk_ti_am3_dpll_x2_priv),
+	.ops = &clk_ti_am3_dpll_x2_ops,
+};
diff --git a/drivers/clk/ti/clk-am3-dpll.c b/drivers/clk/ti/clk-am3-dpll.c
new file mode 100644
index 0000000..7916a24
--- /dev/null
+++ b/drivers/clk/ti/clk-am3-dpll.c
@@ -0,0 +1,268 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * TI DPLL clock support
+ *
+ * Copyright (C) 2020 Dario Binacchi <dariobin@libero.it>
+ *
+ * Loosely based on Linux kernel drivers/clk/ti/dpll.c
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <clk-uclass.h>
+#include <div64.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <hang.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+
+struct clk_ti_am3_dpll_drv_data {
+	ulong max_rate;
+};
+
+struct clk_ti_am3_dpll_priv {
+	fdt_addr_t clkmode_reg;
+	fdt_addr_t idlest_reg;
+	fdt_addr_t clksel_reg;
+	struct clk clk_bypass;
+	struct clk clk_ref;
+	u16 last_rounded_mult;
+	u8 last_rounded_div;
+	ulong max_rate;
+};
+
+static ulong clk_ti_am3_dpll_round_rate(struct clk *clk, ulong rate)
+{
+	struct clk_ti_am3_dpll_priv *priv = dev_get_priv(clk->dev);
+	ulong ret, ref_rate, r;
+	int m, d, err_min, err;
+	int mult = INT_MAX, div = INT_MAX;
+
+	if (priv->max_rate && rate > priv->max_rate) {
+		dev_warn(clk->dev, "%ld is to high a rate, lowered to %ld\n",
+			 rate, priv->max_rate);
+		rate = priv->max_rate;
+	}
+
+	ret = -EFAULT;
+	err = rate;
+	err_min = rate;
+	ref_rate = clk_get_rate(&priv->clk_ref);
+	for (d = 1; err_min && d <= 128; d++) {
+		for (m = 2; m <= 2047; m++) {
+			r = (ref_rate * m) / d;
+			err = abs(r - rate);
+			if (err < err_min) {
+				err_min = err;
+				ret = r;
+				mult = m;
+				div = d;
+
+				if (err == 0)
+					break;
+			} else if (r > rate) {
+				break;
+			}
+		}
+	}
+
+	priv->last_rounded_mult = mult;
+	priv->last_rounded_div = div;
+	dev_dbg(clk->dev, "rate=%ld, best_rate=%ld, mult=%d, div=%d\n", rate,
+		ret, mult, div);
+	return ret;
+}
+
+static ulong clk_ti_am3_dpll_set_rate(struct clk *clk, ulong rate)
+{
+	struct clk_ti_am3_dpll_priv *priv = dev_get_priv(clk->dev);
+	u32 v;
+	ulong round_rate;
+
+	round_rate = clk_ti_am3_dpll_round_rate(clk, rate);
+	if (IS_ERR_VALUE(round_rate))
+		return round_rate;
+
+	v = readl(priv->clksel_reg);
+
+	/* enter bypass mode */
+	clrsetbits_le32(priv->clkmode_reg, CM_CLKMODE_DPLL_DPLL_EN_MASK,
+			DPLL_EN_MN_BYPASS << CM_CLKMODE_DPLL_EN_SHIFT);
+
+	/* wait for bypass mode */
+	if (!wait_on_value(ST_DPLL_CLK_MASK, 0,
+			   (void *)priv->idlest_reg, LDELAY))
+		dev_err(clk->dev, "failed bypassing dpll\n");
+
+	/* set M & N */
+	v &= ~CM_CLKSEL_DPLL_M_MASK;
+	v |= (priv->last_rounded_mult << CM_CLKSEL_DPLL_M_SHIFT) &
+		CM_CLKSEL_DPLL_M_MASK;
+
+	v &= ~CM_CLKSEL_DPLL_N_MASK;
+	v |= ((priv->last_rounded_div - 1) << CM_CLKSEL_DPLL_N_SHIFT) &
+		CM_CLKSEL_DPLL_N_MASK;
+
+	writel(v, priv->clksel_reg);
+
+	/* lock dpll */
+	clrsetbits_le32(priv->clkmode_reg, CM_CLKMODE_DPLL_DPLL_EN_MASK,
+			DPLL_EN_LOCK << CM_CLKMODE_DPLL_EN_SHIFT);
+
+	/* wait till the dpll locks */
+	if (!wait_on_value(ST_DPLL_CLK_MASK, ST_DPLL_CLK_MASK,
+			   (void *)priv->idlest_reg, LDELAY)) {
+		dev_err(clk->dev, "failed locking dpll\n");
+		hang();
+	}
+
+	return round_rate;
+}
+
+static ulong clk_ti_am3_dpll_get_rate(struct clk *clk)
+{
+	struct clk_ti_am3_dpll_priv *priv = dev_get_priv(clk->dev);
+	u64 rate;
+	u32 m, n, v;
+
+	/* Return bypass rate if DPLL is bypassed */
+	v = readl(priv->clkmode_reg);
+	v &= CM_CLKMODE_DPLL_EN_MASK;
+	v >>= CM_CLKMODE_DPLL_EN_SHIFT;
+
+	switch (v) {
+	case DPLL_EN_MN_BYPASS:
+	case DPLL_EN_LOW_POWER_BYPASS:
+	case DPLL_EN_FAST_RELOCK_BYPASS:
+		rate = clk_get_rate(&priv->clk_bypass);
+		dev_dbg(clk->dev, "rate=%lld\n", rate);
+		return rate;
+	}
+
+	v = readl(priv->clksel_reg);
+	m = v & CM_CLKSEL_DPLL_M_MASK;
+	m >>= CM_CLKSEL_DPLL_M_SHIFT;
+	n = v & CM_CLKSEL_DPLL_N_MASK;
+	n >>= CM_CLKSEL_DPLL_N_SHIFT;
+
+	rate = clk_get_rate(&priv->clk_ref) * m;
+	do_div(rate, n + 1);
+	dev_dbg(clk->dev, "rate=%lld\n", rate);
+	return rate;
+}
+
+const struct clk_ops clk_ti_am3_dpll_ops = {
+	.round_rate = clk_ti_am3_dpll_round_rate,
+	.get_rate = clk_ti_am3_dpll_get_rate,
+	.set_rate = clk_ti_am3_dpll_set_rate,
+};
+
+static int clk_ti_am3_dpll_remove(struct udevice *dev)
+{
+	struct clk_ti_am3_dpll_priv *priv = dev_get_priv(dev);
+	int err;
+
+	err = clk_release_all(&priv->clk_bypass, 1);
+	if (err) {
+		dev_err(dev, "failed to release bypass clock\n");
+		return err;
+	}
+
+	err = clk_release_all(&priv->clk_ref, 1);
+	if (err) {
+		dev_err(dev, "failed to release reference clock\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int clk_ti_am3_dpll_probe(struct udevice *dev)
+{
+	struct clk_ti_am3_dpll_priv *priv = dev_get_priv(dev);
+	int err;
+
+	err = clk_get_by_index(dev, 0, &priv->clk_ref);
+	if (err) {
+		dev_err(dev, "failed to get reference clock\n");
+		return err;
+	}
+
+	err = clk_get_by_index(dev, 1, &priv->clk_bypass);
+	if (err) {
+		dev_err(dev, "failed to get bypass clock\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int clk_ti_am3_dpll_of_to_plat(struct udevice *dev)
+{
+	struct clk_ti_am3_dpll_priv *priv = dev_get_priv(dev);
+	struct clk_ti_am3_dpll_drv_data *data =
+		(struct clk_ti_am3_dpll_drv_data *)dev_get_driver_data(dev);
+
+	priv->max_rate = data->max_rate;
+
+	priv->clkmode_reg = dev_read_addr_index(dev, 0);
+	if (priv->clkmode_reg == FDT_ADDR_T_NONE) {
+		dev_err(dev, "failed to get clkmode register\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(dev, "clkmode_reg=0x%08lx\n", priv->clkmode_reg);
+
+	priv->idlest_reg = dev_read_addr_index(dev, 1);
+	if (priv->idlest_reg == FDT_ADDR_T_NONE) {
+		dev_err(dev, "failed to get idlest register\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(dev, "idlest_reg=0x%08lx\n", priv->idlest_reg);
+
+	priv->clksel_reg = dev_read_addr_index(dev, 2);
+	if (priv->clksel_reg == FDT_ADDR_T_NONE) {
+		dev_err(dev, "failed to get clksel register\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(dev, "clksel_reg=0x%08lx\n", priv->clksel_reg);
+
+	return 0;
+}
+
+static const struct clk_ti_am3_dpll_drv_data dpll_no_gate_data = {
+	.max_rate = 1000000000
+};
+
+static const struct clk_ti_am3_dpll_drv_data dpll_no_gate_j_type_data = {
+	.max_rate = 2000000000
+};
+
+static const struct clk_ti_am3_dpll_drv_data dpll_core_data = {
+	.max_rate = 1000000000
+};
+
+static const struct udevice_id clk_ti_am3_dpll_of_match[] = {
+	{.compatible = "ti,am3-dpll-core-clock",
+	 .data = (ulong)&dpll_core_data},
+	{.compatible = "ti,am3-dpll-no-gate-clock",
+	 .data = (ulong)&dpll_no_gate_data},
+	{.compatible = "ti,am3-dpll-no-gate-j-type-clock",
+	 .data = (ulong)&dpll_no_gate_j_type_data},
+	{}
+};
+
+U_BOOT_DRIVER(clk_ti_am3_dpll) = {
+	.name = "ti_am3_dpll_clock",
+	.id = UCLASS_CLK,
+	.of_match = clk_ti_am3_dpll_of_match,
+	.ofdata_to_platdata = clk_ti_am3_dpll_of_to_plat,
+	.probe = clk_ti_am3_dpll_probe,
+	.remove = clk_ti_am3_dpll_remove,
+	.priv_auto = sizeof(struct clk_ti_am3_dpll_priv),
+	.ops = &clk_ti_am3_dpll_ops,
+};